1
00:00:00,240 --> 00:00:07,680
Hi, everyone, in this lecture, we are going to learn about how to change the mood over Wi-Fi adapter.

2
00:00:08,860 --> 00:00:15,730
So this is the first step to put your wireless card into a monitor mode, swim monitor mode, your card

3
00:00:15,760 --> 00:00:19,460
can listen to every packet that is around us.

4
00:00:19,840 --> 00:00:25,040
So by default, the mode of our wireless device is set to manage mode.

5
00:00:25,630 --> 00:00:33,940
That means our wireless device will only capture packets that have our device Mac address as the destination

6
00:00:33,940 --> 00:00:34,630
packages.

7
00:00:35,230 --> 00:00:42,550
So it will only capture Parker's data actually directly to our guy Limousin.

8
00:00:44,020 --> 00:00:51,330
But we want to capture all the factors that are within our range, even if the destination market is

9
00:00:51,340 --> 00:00:52,820
not our Mac address.

10
00:00:53,350 --> 00:00:55,770
So, guys, let's see how we can do that.

11
00:00:56,470 --> 00:01:01,190
So in order to do that, we need to set our model to promote.

12
00:01:01,810 --> 00:01:06,460
So let's see how we can change the mode of our Wi-Fi adapter.

13
00:01:06,830 --> 00:01:11,840
OK, for that, you need to open the terminal window, which as you can see here.

14
00:01:12,910 --> 00:01:14,020
Now, let's zoom here.

15
00:01:14,590 --> 00:01:21,730
And the first step is that you need to connect your Wi-Fi adapter with the device in which you're using

16
00:01:22,060 --> 00:01:22,570
Linux.

17
00:01:23,110 --> 00:01:31,020
So after connecting so you can see that in devices and USB, you can see that I'm having Atheros, U.B.

18
00:01:31,030 --> 00:01:31,720
nine Wannsee.

19
00:01:31,720 --> 00:01:33,610
So this is the adapter that I'm using.

20
00:01:33,910 --> 00:01:40,060
OK, so you need to select to adapt then and after this disclosers and in order to check it disconnected

21
00:01:40,270 --> 00:01:48,970
or not, simply if config and hit enter so often enter as you can see that villans zero zero.

22
00:01:48,980 --> 00:01:53,000
That means we are, we have successfully connected with our Wi-Fi adapter.

23
00:01:53,410 --> 00:01:58,630
So now let's check how we can see actually work with it.

24
00:01:58,660 --> 00:02:05,800
OK, so first of all, let's clear this particular screen and the first go on that I'm going to give

25
00:02:05,800 --> 00:02:07,480
you is if config.

26
00:02:09,140 --> 00:02:18,400
If config name of your wife interface and simply don't know what it will do, it will disable the management,

27
00:02:18,650 --> 00:02:21,500
OK, of after hitting enter, it is not going anywhere.

28
00:02:21,530 --> 00:02:23,030
That means everything is going fine.

29
00:02:23,750 --> 00:02:24,200
Then the next.

30
00:02:24,200 --> 00:02:27,830
Come on, I'm going to give here is I w OK guys.

31
00:02:28,130 --> 00:02:35,750
So let me sue you if config v line.

32
00:02:36,960 --> 00:02:43,830
Up first of all, up, and then I'm going to sue you in which mode currently my debate is on.

33
00:02:44,360 --> 00:02:48,570
OK, simply give the blue can be entered into soft lighting.

34
00:02:48,570 --> 00:02:51,660
And as you can see, that mode is equal to manage.

35
00:02:51,840 --> 00:02:54,030
That means we need to change the more to mind.

36
00:02:54,310 --> 00:02:55,900
OK, so now let's do it.

37
00:02:56,310 --> 00:02:58,080
So this is important to you.

38
00:02:58,090 --> 00:03:00,050
That is why stop the process.

39
00:03:00,270 --> 00:03:10,290
Now, let's see again simply if Canfor interface name down so it will down and then the next come on

40
00:03:10,320 --> 00:03:18,250
I the blue config vilan zero mode is more neutral.

41
00:03:18,890 --> 00:03:24,960
OK, so this command is used to enable the motor mode now to enter into Nuada.

42
00:03:24,980 --> 00:03:26,800
That means everything is going very fine.

43
00:03:27,570 --> 00:03:28,590
So now let's go on that.

44
00:03:28,590 --> 00:03:29,760
I'm going to give you here is.

45
00:03:31,070 --> 00:03:34,160
A gun free vilan.

46
00:03:35,130 --> 00:03:38,520
Now it's time to up our interface, now to.

47
00:03:39,640 --> 00:03:42,200
So now, as you can see that it is working.

48
00:03:42,220 --> 00:03:45,130
Now everything is going fine now our device is now up.

49
00:03:45,160 --> 00:03:50,510
OK, so now let's check by giving IWK config.

50
00:03:50,560 --> 00:03:51,850
Come on, let's check.

51
00:03:53,440 --> 00:03:56,320
Enrichment, currently it is on, OK?

52
00:03:56,360 --> 00:04:02,920
So OK, so I w config, we learn zero in our data.

53
00:04:03,820 --> 00:04:06,060
So as you can see that offloading under.

54
00:04:07,040 --> 00:04:09,600
We are having more difficult to monitor.

55
00:04:10,530 --> 00:04:19,070
OK, so this means that we have successfully geneste over monitor mode management to monitor more.

56
00:04:20,070 --> 00:04:25,830
So as we all know that we have converged all can you know, we have changed the mood as more so now

57
00:04:25,830 --> 00:04:33,300
we are able to capture all the Wi-Fi packets that are within our reach, even if the packets are not

58
00:04:33,300 --> 00:04:37,560
dedicated to our computer or even without knowing the password of the target.

59
00:04:38,070 --> 00:04:43,030
OK, so for that, we need a program that can capture the packets for us.

60
00:04:43,050 --> 00:04:49,350
So this program we are going to use here is Adam Engy, so let's see how we can work with it.
